Operation Manual

Before operating the equipment,the user must carefully read the opera- tion manual of this specification and strictly abide by the rules.This manual is applicable to multiple models of products.

★This equipment uses international standard four types of laser (strong laser radiation).Laser radiation may cause the following events:①Ignite surrounding combustibles;②During the laser processing process,due to different processed objects,other radiation and other toxic and harmful ef- fects may be generated Gas;③Direct laser radiation may cause personal injury.Therefore,the equipment must be equipped with fire-fighting equip- ment.It is strictly forbidden to stack flammable and explosive materials on the workbench and around the equipment.At the same time,ensure good ventilation.Non-professional operators are not allowed to approach the equipment.

★Laser processing objects and emissions should comply with local laws and regulations.

★Laser processing may have high risks,so you should carefully con- sider whether the object is suitable for laser processing.

★The internal laser equipment has high voltage and other dangers, except for equipment operators,it is strictly prohibited to disassemble.

★When the equipment is turned on,someone must be guarded,unau- thorized leaving is prohibited,and all power must be cut off before personnel leave.

★It is forbidden to open any doors when the equipment is working.

★Before starting operation,this equipment and other equipment must be safely and effectively grounded.

★Do not place any unrelated total reflection or diffuse reflection objects in the device to prevent the laser from being reflected on the human body or flammable objects.

★During the operation of the equipment,the operator must always ob- serve the operation of the equipment.If an abnormal situation occurs,please immediately cut off all power supplies and actively take corresponding mea- sures.

★The equipment should be in a dry,pollution-free,vibration-free,and strong electromagnetic interference environment,with a working temperature of 5-40 degrees Celsius and a humidity of 5-95%(non-condensing water environment).

★The equipment should always be far away from electrical equipment sensitive to electromagnetic interference,otherwise it may cause electro- magnetic interference.

★The working voltage of the equipment is:AC220V/50Hz AC110V / 60HZ(Please confirm the working voltage of the equipment before use)

★The most important carbon dioxide glass laser in the equipment is a consumable and a vulnerable item.Please take care of it during use.The carbon dioxide glass laser needs pure cold water to cool down.Please pay attention to the water temperature not to exceed 30 degrees Celsius during use,otherwise the laser will be damaged.When the surrounding temperature is about to drop below 0 degrees Celsius,please replace it with an antifreeze liquid to avoid damage to the carbon dioxide glass laser. It is forbidden to turn on the equipment when the grid voltage is unstable or mismatched,and the manufacturer and seller are not liable for any loss caused by incorrect use or non-compliance with the above regulations.